• The systems of aluminum sliding partitions are an excellent solution for dividing the space of a room, as well as a modern and stylish addition to your interior.
  • The PROFILDOORS factory offers sliding aluminum partitions, made of domestically produced profiles, made using the latest technologies.
  • Sliding partitions consist of a durable and lightweight aluminum profile filled with glass.
  • Color solutions of the profile are achieved by powder painting. Triplex glass 3 + 3mm in various designs is used as filling. Italian-made fittings are responsible for the operation of our partitions.
Types of sliding partitions

    Sliding construction of 3 or 4 panels.

    The system's operating principle:
    Simultaneous (synchronous) movement of webs parallel to each other in one direction. Each web in the system has its own guide rail, there is no door closer in the Cascade system.
    The structure can only be mounted in the opening (or to the ceiling).
    The design is individually made to suit the customer's opening.
    Каскад-схемы2 — копия.jpg

    Sliding construction of 1-4 webs (the number of webs varies depending on the type of installation, "in front of the opening" wall installation 1-2 webs, "in the opening" ceiling installation 2-4 webs).

    The system's operating principle:
    Installation «in front of the opening»:
    a system of 2 blades (or one), each blade moves from the centre of the opening parallel to the wall, resting on the same guide rail, opening the opening. Each blade has a bi-directional door closer that ensures smooth closing and opening.
    Перегородки схемы1 — копия.jpg

    Mounting «in the opening»:
    1. In a system of 2 webs, the webs are staggered on different guides. Both webs move in the opposite direction from their original base position. Each blade has a bi-directional door closer that ensures smooth closing and opening.
    Перегородки схемы 2 — копия.jpg
    2. In a system of 3 or 4 webs, the webs are placed on two rails, positioned parallel to each other. The two outermost webs are positioned behind and against the wall, the webs are stationary and do not move. The central webs are located in the first row of the construction and move in the direction of the stationary webs away from the centre of the opening. The door closer is only located in the active webs. Translated with (free version)
    Перегородки схемы 3 — копия.jpg
The advantages of sliding partitions
Many people ask the question: why do we need partitions, if today there is a huge range of door designs to choose from? Let's try to consider the main advantages in order to answer this question.
So let's highlight the following:
  • For the production of partition profiles, an aluminum alloy is used, which ensures the absence of deformation and corrosion during operation.
  • With the help of a sliding partition, you can quickly and easily zone the space, both residential and non-residential.
  • The minimalist design and "lightness" of the construction correspond to the modern trends in architecture and building design.
  • The design is collapsible. Partitions are easy not only to install, but also to dismantle at any time, for example, in the event of a move. In addition, the design of the canvases allows for glass replacement in case of damage.
Profile and model range
The production of sliding partitions is based on a system of exclusive
aluminum profiles made in Russia.
Model 1
Model 1
Model 2
Model 2
Model 3
Model 3
Model 4
Model 4
Model 5
Model 5
It is possible to manufacture models from AG, AV, AX or according to the customer's drawing (the cost is based on the model by the number of jumpers).
*This sliding door handle is factory set to aluminum profile color (except models 6AG, 7AG, 11AG, 12AG, 17AG). Size 174x26x14 mm.
Aluminum profile

Blue matt RAL5003
Green matt RAL6004


Black matt RAL9005 
Grey night
Nickel matt
Cream white
Cream magnolia

Filling partitions

Triplex 3+3 мм

clear glass.

Triplex 3+3 мм

Transparent darkened
glass, with shades of grey.

Triplex 3+3 мм

Glass with poor light permeability, only the silhouette of the object is visible up close with the glass. The surface is smooth.

Triplex 3+3 мм

The glass is mirrored on both sides. Completely light-proof.

Triplex 3+3 мм

Completely light-tight.


Triplex 3+3 мм

Completely light-tight.

Triplex 3+3 мм
Comfort Neutral (on order)

Clear, colourless glass, highly reflective.

Triplex 3+3 мм
Comfort Grey (on order)

Transparent tinted glass, with a grey tint and high reflectivity.


Glass Moru 3+3
(on order)

Transparent corrugated glass, the feature of the glass is the pattern with vertical stripes.

The scheme of placing the closer in the track
The scheme of placing the closer in the track
Closer "bi-directional", works when opening and closing the curtain
The scheme of placing the closer in the track
The scheme of placing the closer in the track
The scheme of placing the closer in the track
Limitations, recommendations, terms and features
  • The depth of the opening for installation "in the opening" is at least 120mm.
  • For the most accurate measurement result and subsequent production of canvases, it is recommended to use electronic measuring devices. (Laser rangefinder, digital protractor).
  • Measurement of the opening geometry is required at least 3 points of the opening, both in height and width of the opening.
  • The maximum number of canvases in the partition in the conditions of installation "in front of the opening" - 2 pcs.
  • Maximum blade height: 3000mm (except "Model 1" - 2400mm).
  • Minimum width of the leaf: 600mm (for the leaf in which the closer is planned to be installed), 400mm (for inactive leaf).
  • Maximum web width: 1000mm (Allowed to exceed 1050mm).
  • Working with the configurator